It is not every day that we get to work in our back yard but earlier this year we had that opportunity as we completed a diplexing system for our friends at WMTN 1300 and WCRK 1150, located in the Morristown, TN area. Both stations have a long standing history, with WMTN’s original FCC engineering […]
Continue reading
Last year, we had the privilege of working with Walnut Media USA in Omaha, Nebraska to design and manufacture the antenna tuning units and filters to diplex station KIBM 1490kHz on station KCRO 660kHz, both 1 kW. All of the equipment was mounted in unpainted aluminum enclosures with support stands. The equipment included shunt filters […]
Continue reading
During the height of the Covid-19 pandemic, we shipped the AM matching and filtering equipment to diplex Nebraska Rural Radio station KUVR/1380kHz onto sister station KRVN/880kHz. Existing station KRVN is a 50kW station operates non-directionally during the day and directionally at night with a four tower in-line array. KUVR is a low-power, non-directional station, operating […]
Continue reading
In September of this year the new broadcast operation of the Sher E Punjab Media AM radio station was launched as a result of new phasing, matching and filtering equipment designed and supplied by Kintronic Labs and installed by GS Broadcast Technical Services that was utilized to facilitate the co-location of the Sher E Punjab […]
Continue reading
Radio Stations KHKA 1500kHz and KLHT 1040kHz have a brand new transmitting site and diplexing equipment thanks to the Honolulu Authority for Rapid Transportation (HART). Since the old site was directly in the path of the new elevated rail system that has been under construction on Oahu for some time, HART was required to pay […]
Continue reading
Early this year Kintronic supplied Canada’s Trafalgar Broadcasting with ATUs, filter cabinets and a new phasor to facilitate the diplexing of AM stations CJMR and CJYE in Oakville, Ontario. It was a unique situation in that the ATU buildings were very small, requiring their roofs to be removed in order to lower the ATU and […]
Continue reading
We are one step closer to the completion of the WMAL WSPZ diplexing project, as our team wrapped up the installation of the WMAL 4-tower DA-1 open panel and shelf phasor and other accessories in the new Kintronic-supplied prefab concrete transmitter building last week. Next stop: Germantown, Maryland, for the final installation, tuning and commissioning.
Continue reading
Broadcom International recently released a report on the commissioning of a diplexer supplied by LS Telcom of South Africa for the Sentech MW site in Welgedacht, South Africa. Kintronic Labs supplied the DRM-capable antenna system consisting of the diplexing unit for the operation of 2×50 kW operating frequencies (540 kHz and 702 kHz) connected to […]
Continue reading
Installation of the WKDM – WWRU 4-Tower Array Output cabinet at WKDM Tower 2 showing installation of the VSU Output cabinet at WKDM-WWRU shared Tower 4 showing installation of two VSUs WKDM-WWRU Self-SupportingTowers
Continue reading
WGBR WFMC Diplexer Installation “I will tell anyone in the world that asks (and have on many occasions) that you folks are on top of the game. My favorite Kintronic story is the Phasor and Diplexer I ordered for WGBR and WFMC in Goldsboro, NC. After installing it and turning it on, to get the […]
Continue reading